Accessories And Equipment; Optional; Spares - Megger OTS80AF User Manual

Only Megger supplied accessories can be used with the OTS range. Non approved
equipment cannot be guaranteed to work with the OTS.
Factory fitted accessories depending on order configuration
Internal printer
■ ■
Electrode sets – IEC, ASTM and full electrode set containing one of each type of electrode
■ ■
Vessel lid mounted impeller for use with 400 ml vessel(standard red impeller supplied, see page 9)
■ ■
Power lead
■ ■
PowerDB Lite CD
■ ■
Optional accessories & spares
VCM100D voltage check meter
■ ■
VCM80D voltage check meter
■ ■
Vessel assembly 400 ml (no electrodes)
■ ■
Vessel assembly 150 ml (no electrodes)
■ ■
Vessel lid mounted impeller for use with 400 ml vessel
■ ■
ASTM alternative propeller shaft assembly
■
IEC alternative propeller shaft assembly
■
Large red impeller
■
OTS super-user kit
■ ■
Included accessories:
Vessel 400 ml assembly
■
Vessel 150 ml assembly
■
Stirrer lid assembly with three impellers
■
■
■
■
The Megger guide to insulating oil dielectric breakdown testing booklet
■
Carry case
■
Electrode set IEC 156
■ ■
Electrode set ASTM D 877/1816
■ ■
Full electrode set – contains all electrodes
■ ■
Printer paper
■ ■
Barcode reader, USB
■ ■
Electrodes - Spherical (pair)
■ ■
Electrodes - Mushroom (pair)
■ ■
Electrodes - Cylindrical (pair)
■ ■
Electrodes - Non-standard cylindrical with
■ ■
0,5 mm edge radius (pair)
Electrode gauge set 1, 2, 2.5, 2.54, 4 mm
■ ■
24
ASTM alternative propeller shaft assembly
IEC alternative propeller shaft assembly
Large red impeller
1001-105
1001-801
1001-473
1001-474
1001-102
1007-153
1007-154
1007-467
1001-447
1001-478
1001-479
25991-001
1001-047
6220-484
6220-580
6220-483
6220-538
1002-144