Advertisement
Contents
Connections
General
Alarm
Audio from the set input source can be played back at a specified time.
Use this to set playback for the same time every day, or set alarm
playback on a certain day of the week.
o Alarm 1
On:
Off:
o Alarm 2
On:
Off:
o Edit Alarm
Used to edit Alarm 1 or Alarm 2.
1
Use ui to select "Alarm 1" or "Alarm 2", then press
ENTER.
2
Use ui to setting for the alarm start time, then press
ENTER.
Front panel
Rear panel
Playback
Enables Alarm 1.
Disables Alarm 1.
Enables Alarm 2.
Disables Alarm 2.
Remote control
unit
Settings
3
Use ui to change to desired setting, then press
ENTER.
Never:
Everyday:
Weekdays:
Weekends:
Custom:
4
Use ui to select the input source, then press ENTER.
CD / Tuner / Optical In 1 / Optical In 2 / Analog In
0 When "Tuner" is selected, select a preset number.
5
Use ui to select the volume level "00 – 100", then
press ENTER.
The display shows "Complete!!" and the setting is completed.
96
Index
Tips
Appendix
Alarm is not repeated. (single time only)
Alarm is repeated every day.
Alarm is repeated on weekdays (Mon.
to Fri.) only.
Alarm is repeated on weekends (Sat.,
Sun.) only.
Used to set alarm on/off settings
individually for each day of the week.
Alarm is repeated only for days set to
on.
Advertisement
