Advertisement
Contents
Connections
o Response
Switches the frequency characteristics of the speaker output. Set as
desired.
Flat
(Default):
Response1 :
Response2 :
Response3 :
Response4 :
0 When the "Speaker Configuration" - "Amplifier Mode" setting is "Standard (A,
B, or A+B)", SPEAKERS A/B terminals can be set individually.
0 The "Response" setting is not reflected in headphones, audio or subwoofer
output.
Front panel
Rear panel
Playback
Properties are flat.
Cuts low frequencies 40 Hz or under by
–12 dB/oct.
Cuts low frequencies 60 Hz or under by
–12 dB/oct.
Cuts low frequencies 80 Hz or under by
–12 dB/oct.
Cuts low frequencies 100 Hz or under by
–12 dB/oct.
Remote control
unit
Settings
Audio Out
You can set the analog audio output volume to "Fixed" or "Variable".
Fixed:
Variable
(Default):
0 When "Variable" is set, analog audio output volume is linked to speaker A volume.
Adjusting the volume of speaker B will not alter analog audio output volume.
(v p. 84)
0 When the speaker for audio output is set to "Speaker B = On", this unit does not
perform analog audio output. (v p. 83)
NOTE
0 Note that the analog audio output level changes to the maximum when the analog
audio output setting is changed from "Variable" to "Fixed".
0 Before changing the settings, turn the volume of the amp connected to the AUDIO
OUT connectors and headphones connected to the unit to the minimum volume.
95
Index
Tips
Appendix
Fixes the analog audio output level.
You can adjust the analog audio output
level using the VOLUME df buttons.
The analog audio output volume is linked to
the Speaker A volume.
Advertisement
