Advertisement
Contents
Connections
Power does not turn on / Power is turned off
Power is not turned on.
Check whether the power plug is correctly inserted into the power outlet. (v p. 33)
0
This unit is in standby mode. Press the X button on the unit or the POWER X button on the remote control. (v p. 35)
0
Power automatically turns off.
The sleep timer is set. Turn on the power again. (v p. 81)
0
"Auto-Standby" is set. "Auto-Standby" is triggered when there is no operation for a set amount of time. To disable "Auto-Standby", set "Auto-Standby"
0
on the menu to "Off". (v p. 100)
LED is flashing
Flashing red.
This unit's amplifier circuit has failed. Disconnect the power and contact the repair center.
0
Flashing orange.
Time and day of the week are incorrect due to power disconnection, firmware update, etc., and need to be adjusted. Check the network connection and
0
adjust the time and day of the week. (v p. 97)
Time display is flashing
Time display is flashing.
Time and day of the week are incorrect due to power disconnection, firmware update, etc., and need to be adjusted. Check the network connection and
0
adjust the time and day of the week. (v p. 97)
Front panel
Rear panel
Playback
Settings
118
Remote control
unit
Tips
Index
Appendix
Advertisement
