Advertisement
Contents
Connections
Audio
Make audio-related settings.
Volume Limit
Make a setting for maximum volume. The volume cannot be increased
above this setting.
Off
Do not set a maximum volume. (100)
(Default):
95 / 90 / 85 / 80
Front panel
Rear panel
Playback
Settings
H/P Amplifier Gain
Set the gain of the headphone amplifier. Set this according to the
impedance of the connected headphones. It is recommended that this is
set on the "Low" side if the headphones have low impedance and on the
"High" side if they have high impedance.
High:
Mid
(Default):
Low:
NOTE
0 The headphone volume varies depending on the H/P Amplifier Gain setting.
Decrease the volume or mute the audio first if changing this setting while listening
to audio.
93
Remote control
unit
Tips
Set the gain of the headphone amplifier to
"High". Set when there is insufficient
volume, even when the gain setting is
"Mid".
Set the gain of the headphone amplifier to
"Mid".
Set the gain of the headphone amplifier to
"Low". Set this if the volume is too high at
the factory default setting.
Index
Appendix
Advertisement
