Advertisement
Contents
Connections
o Selecting speakers to output audio
You can set up this unit to output audio from Speaker A, Speaker B, or
both.
1
Press SPEAKER A/B.
The current setting is displayed.
2
Press SPEAKER A/B repeatedly to select the setting.
The setting changes each time SPEAKER A/B is pressed.
0
Speaker A = On :
Outputs audio from Speaker A only.
Speaker B = On :
Outputs audio from Speaker B only.
Both Speakers A and B = On :
Outputs audio from both Speaker A and Speaker B.
0 When using the multi-drive connection, set "Speaker Configuration" – "Amplifier
Mode" in the settings menu to "Standard (A, B, or A+B)". (v p. 94)
Front panel
Rear panel
Playback
Settings
o Specifying speakers to adjust the volume
When 2 sets of speakers (Speaker A/Speaker B) are connected, either
Speaker A or Speaker B can be selected for volume adjustment.
1
2
0 This is only enabled when "Both Speakers A and B = On" is set for the audio
output speakers.
84
Remote control
unit
Tips
Press VOLUME A/B.
The speakers whose volume is to be adjusted are shown in the unit
display.
Use VOLUME df to adjust the volume.
Index
Appendix
Advertisement
