Advertisement
Contents
Connections
Cautions on using media
Inserting a disc
Set the disc in the tray label side up.
0
Make sure the disc tray is fully open when inserting the disc.
0
Place the discs flatly, 12 cm discs in the outer tray guide (Figure 1), 8
0
cm discs in the inner tray guide (Figure 2).
Figure 1
Outer tray guide
12 cm disc
Place 8 cm discs in the inner tray guide without using an adapter.
0
Front panel
Rear panel
Playback
Figure 2
Inner tray guide
8 cm disc
Remote control
unit
Settings
NOTE
0 Only load one disc at a time. Loading two or more discs can damage the unit or
scratch the discs.
0 Do not use cracked or warped discs or discs that have been repaired with
adhesive, etc.
0 Do not use discs on which the sticky part of cellophane tape or labels is exposed
or on which there are traces of where labels have been removed. Such discs can
get caught inside the player and damage it.
0 Do not use discs in special shapes, as they may damage the unit.
0 Do not push the disc tray in by hand when the power is off. Doing so could
damage the unit.
0 Do not place any foreign objects in the disc tray. Doing so could result in damage.
0 If the unit is left in a room full of smoke from cigarettes, etc., for long periods of
time, the surface of the optical pickup may get dirty, preventing it from receiving
signals properly.
140
Index
Tips
Appendix
Advertisement
