Onkyo TX-NR797 Instruction Manual page 75

USB Storage Device
You can play music files stored on a USB storage device.
Basic Operations
TV's REMOTE
Inputs
INPUT
TV
HDMI 1
HDMI 2
HDMI 3
The illustration shows an image.
Contents Connections
≫
Perform the following procedure when this unit is on.
1. Switch the input on the TV to the input connected to the unit.
2. Plug your USB storage device containing music files into the USB port of this
unit's rear panel.
3. Press NET to display the network service list screen.
4. Select "USB" with the cursors, and then press ENTER.
• If the "USB" indicator blinks on the display, check whether the USB storage
device is plugged in properly.
• Do not unplug the USB storage device while "Connecting..." is being
displayed on the display. This may cause data corruption or malfunction.
5. Press ENTER on the next screen again. The list of folders and music files on
the USB storage device is displayed. Select the folder with the cursors, and
press ENTER to confirm your selection.
6. Select the music file with the cursors, and then press ENTER to start playback.
NET
75
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫ ≫
/ / /
ENTER
Setup
≫