Onkyo TX-NR797 Instruction Manual page 131

1. Input/Output Assign
„ 1. TV Out / OSD
Make settings for TV output and On-Screen Displays (OSD) that appear on the
TV.
Setting Item Default Value
HDMI Out MAIN
Dolby Vision MAIN
Setting Details
Select the HDMI jack to be connected with the TV.
"MAIN": When connecting the TV to the HDMI OUT
MAIN jack
"SUB": When connecting the TV to the HDMI OUT
SUB jack
"MAIN+SUB": When connecting to both the MAIN
and SUB jacks
• If devices with different resolutions are
connected to HDMI OUT MAIN jack and SUB
jack, images are output with the lower resolution.
To output Dolby Vision video from the player to
a TV that supports Dolby Vision, select either
the HDMI OUT MAIN jack or HDMI OUT SUB
jack to which the Dolby Vision-supported TV is
connected. This setting is only necessary if you
have set "HDMI Out" to "MAIN+SUB" and you have
connected a TV to both the MAIN and SUB jacks.
"MAIN": To output Dolby Vision video to a Dolby
Vision-supported TV connected to the HDMI OUT
MAIN jack.
"SUB": To output Dolby Vision video to a Dolby
Vision-supported TV connected to the HDMI OUT
SUB jack.
• After selecting "MAIN" or "SUB", if the video
on the TV does not appear correctly, set this to
"Off".
Contents Connections
≫
Setting Item Default Value
1080p -> Off
4K Upscaling
Super Resolution 2
Zone 2 HDMI Not Use
OSD Language English
Impose OSD On
131
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
When a TV supporting 4K is used, video signals
input with 1080p can be automatically output with
4K.
"Off": When this function is not used
"Auto": When this function is used
If your TV does not support 4K, set it to "Off".
• If the TV does not support the 4K resolution
with the same frequency as the frequency of
HDMI input video signals, upscaling to 4K is not
correctly performed. Check the frequency of 4K
resolution supported by the TV, and change the
resolution of the video signals input from the AV
component.
When "1080p -> 4K Upscaling" is set to "Auto",
select the correction level of the input video signals
from "Off" and "1" (weak) to "3" (strong).
Make the setting when you output to the Zone 2 TV
connected to the HDMI OUT ZONE 2/SUB jack.
"Use": Enable this function
"Not Use": Disable this function
• When video and audio via HDMI input are output
to ZONE 2, set it to "Use".
Select the on-screen display language from the
following.
(North American models) English, German, French,
Spanish, Italian, Dutch, Swedish
(Asian models) English, German, French, Spanish,
Italian, Dutch, Swedish, Russian, Chinese
Set whether or not to display information such as
volume adjustment or switching of input on the TV
screen.
"On": OSD is displayed on the TV.
"Off": OSD is not displayed on the TV.
• OSD may not be displayed depending on the
input signal even if "On" is selected. In this case,
change the resolution of the connected device.
≫