Onkyo TX-NR797 Instruction Manual page 148

Setting Item Default Value Setting Details
AirPlay Password You can set a password of up to 31 digits so that
only users that have input can use AirPlay
1. Press ENTER to display the Edit screen.
2. Select a character or symbol with the cursors,
3. After inputting, select "OK" with the cursors, and
Privacy Statement Not Accepted When using a network service that requires a login
name, email address, password, etc., you need to
agree to the Privacy Statement of our company.
Network Check - You can check the network connection.
Press ENTER when "Start" is displayed.
• Wait for a while if "Network" cannot be selected. It can be selected when the network
function is activated.
and press ENTER.
Repeat this operation to input up to 31 characters.
"A/a": Switches between upper and lower cases.
(Pressing MODE on the remote controller also
toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the cursor.
" ": Enters a space.
• To select whether to mask the password with
"" or display it in plain text, press MEMORY
on the remote controller.
• Pressing CLEAR on the remote controller will
remove all the input characters.
press ENTER.
The input password will be saved.
• This function cannot be used when registering
this unit to Home App.
• This setting can be made after confirming the
Privacy Statement. When you select "Privacy
Statement" and press ENTER, the Privacy
Statement is displayed.
• When "Not Accepted" is selected, you will log out
from the network service you have logged in.
Contents Connections
≫
„ 3. Bluetooth
Change the settings for the Bluetooth function.
.
®
Setting Item Default Value
Bluetooth On
Auto Input On
Change
Auto Reconnect On
148
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Select whether or not to use the BLUETOOTH
function.
"On": Enables connection with a BLUETOOTH-
enabled device by using the BLUETOOTH
function. Select "On" also when making various
BLUETOOTH settings.
"Off": When not using the BLUETOOTH function
When a BLUETOOTH-enabled device is played
while it is connected to the unit, the input
of the unit can be automatically switched to
"BLUETOOTH".
"On": The input is automatically set to
"BLUETOOTH" responding to the playback
operation of the BLUETOOTH-enabled device.
"Off": The function is disabled.
• If the input is not switched automatically, set this
to "Off", and change the input manually.
This function automatically reconnects to the
BLUETOOTH-enabled device connected last
when you change the input to "BLUETOOTH".
"On": When this function is used
"Off": When this function is not used
• This may not work with some BLUETOOTH-
enabled devices.
≫