Onkyo TX-NR797 Instruction Manual page 122

Input Format Listening Mode
Multich PCM Direct
Multich
*1
DSur
DTS Neural:X
THX Games
THX Sel Gam
Game-RPG
Game-Action
Game-Rock
Game-Sports
AllCh Stereo
Full Mono
*5
T-D
*6
A center speaker or surround speakers need to be installed.
*1
Surround speakers need to be installed.
*2
Surround back speakers need to be installed. Can be selected when the
*3
input format is 5.1 ch.
Surround speakers or height speakers need to be installed.
*4
A center speaker, surround speakers, or height speakers need to be
*5
installed.
Cannot be selected if "Speaker Virtualizer" is set to "Off".
*6
Input Format
DSD
• You cannot select any
mode other than Direct,
AllCh Stereo and Full
Mono if the sampling
rate is 5.6/11.2 MHz.
*2
*3
*4
*4
*4
*4
*5
Cannot be selected when the input format is monaural or 2 ch.
*1
A center speaker or surround speakers need to be installed.
*2
Surround speakers need to be installed.
*3
Surround back speakers need to be installed. Can be selected when the
*4
input format is 5.1 ch.
Surround speakers or height speakers need to be installed.
*5
A center speaker, surround speakers, or height speakers need to be
*6
installed.
Cannot be selected if "Speaker Virtualizer" is set to "Off".
*7
Contents Connections
≫
Listening Mode
Direct
DSD
*1 *2
DSur
DTS Neural:X
THX Games
*3
THX Sel Gam
*4
Game-RPG
*5
Game-Action
*5
Game-Rock
*5
Game-Sports
*5
AllCh Stereo
*6
Full Mono
*6
T-D
*7
122
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫
Input Format Listening Mode
Atmos Direct
*1
Atmos
Game-RPG
Game-Action
Game-Rock
Game-Sports
AllCh Stereo
Full Mono
T-D
*2
With the firmware version before supporting Atmos 2.0, etc., you can
*1
select the DD+ or DTHD listening mode when surround back
speakers or height speakers are not connected.
Cannot be selected if "Speaker Virtualizer" is set to "Off".
*2
❏ Speaker Layouts and
Selectable Listening Modes
( p103)
Setup
≫ ≫