ABB TPS 61D01 Operation Manual page 96

Operation Manual / TPS48-D/E.. - TPS61-D/E..
8 Disassembly and assembly / 8.3 Disassembling and assembling tur-
bocharger
If provided
© Copyright 2020 . All rights reserved.
Fitting the gas outlet flange and gas outlet manifold
If provided, fit the C-ring (52408).
u
Fit the gas outlet flange (52400).
u
For gas outlet manifolds (51100) from ABB:
u
always replace the gasket (52406) (see the chapter entitled Spare
parts).
Apply high-temperature grease to contacting surfaces and threads.
u
Fit the turbine casing using the nuts (52433) while observing tighten-
u
ing torques specified in the table of tightening torques.
Fasten the insulation.
u
Attach pipes in accordance with the enginebuilder's instructions.
u
HZTL2410_EN Rev.F March 2020