ABB TPS 61D01 Operation Manual page 66

Operation Manual / TPS48-D/E.. - TPS61-D/E..
5 Maintenance / 5.4 Cleaning components mechanically
© Copyright 2020 . All rights reserved.
Cleaning the compressor end
CAUTION
Selection of the cleaning agent
Cleaning agents which contain chlorine attack metals.
Use only pH-neutral cleaning agents which do not attack metals.
u
Observe safety data sheet.
u
CAUTION
Water and contamination in the cartridge group
If water or contamination penetrates the cartridge group, this can im-
pair the function of the turbocharger and damage parts inside the cart-
ridge group.
Make sure that no water or contamination can enter into the cart-
u
ridge group.
Clean compressor wheel with a cloth or soft brush soaked in water
u
with household detergent. Do not use any wire brushes!
Dry the compressor wheel and the gap between the compressor and
u
the bearing casing with a weak jet of compressed air.
Lightly spray the compressor wheel and the gap between the com-
u
pressor and the bearing casing with penetrating oil.
Dispose of dirty water and cleaning agent in accordance with the
u
safety data sheet.
HZTL2410_EN Rev.F March 2020