ABB TPS 61D01 Operation Manual page 95

Operation Manual / TPS48-D/E.. - TPS61-D/E..
8 Disassembly and assembly / 8.3 Disassembling and assembling tur-
bocharger
If provided
If provided
© Copyright 2020 . All rights reserved.
Plug in the cable connector (86515) for the speed sensor (86505) and
u
fit the insulation plates (1, 2).
Removing gas outlet manifold and gas outlet flange
Disconnect all lines in accordance with enginebuilder's instructions
u
and remove insulation (see also preceding chapter).
Loop lifting gear around gas outlet manifold (51100).
u
Remove gas outlet manifold (51100) and gasket (52406). Only gas
u
outlet manifolds from ABB have the gasket (52406).
Remove gas outlet flange (52400) and, if fitted, C-ring (52408).
u
HZTL2410_EN Rev.F March 2020