ABB TPS 61D01 Operation Manual page 94

Operation Manual / TPS48-D/E.. - TPS61-D/E..
8 Disassembly and assembly / 8.3 Disassembling and assembling tur-
bocharger
© Copyright 2020 . All rights reserved.
Fasten the cartridge group using fastening strips (51002), Verbus
u
Ripp® washers (51003) and nuts (51007) (also see the chapter entitled
Table of tightening torques).
Fasten the bearing casing (42001) using the fixing screws (C).
u
Tighten the fixing screws (C) to the torques listed in the following
u
table.
**) For the assembly of the turbocharger on the engine support, the
threads of the screws and screw heads must be lightly oiled (assumed
coefficient of friction µ = 0.12 for the tightening torque).
Product Hole in the bearing
casing
[mm]
TPS48 Ø 17
TPS52 Ø 21
TPS57 Ø 21
TPS61 Ø 25
HZTL2410_EN
Fixing screws C [mm]
M16
M20
M20
M24
Rev.F
Tightening
torques [Nm] **)
230
455
455
780
March 2020