Advertisement
5. Connecting to the Adapter Board
The adapter board and header board are connected by flat cables that are supplied with the adapter
board. The flat cable connector C on the adapter board is not needed in this product (see Figure 5).
■ Connecting
Insert the eject lock units into the flat cable connectors on each of the boards until locked.
Adapter board
Eject lock
■ Disconnecting
Disconnect the flat cables by releasing the locks and pulling out the eject locks of the flat cables.
6
Flat cable connector
C
A
B
Figure 5 Connection to the adapter board
Flat cable
A
Flat cable connector
Eject lock
Header board
B
Advertisement
