Major Components; Power And Charging; Connection And Mounting - Magtek eDynamo Quick Installation Manual

Major Components

CON 1
MICRO USB B PLUG
micro-USB cable

Power and Charging

Power: Power via micro-USB (utilize its wired USB interface and power to operate
while connected to a PC or tablet-based POS system where a USB Host and power
are available) or via the rechargeable battery.
Charging: Fully charge eDynamo before first use (for 3 hours or until the LED
is solid green). Fully charge eDynamo within 5 months of shelf storage.
Charging via industry standard USB cables. Requires USB port for charging before
use. Subsequent charging requires just a couple of hours for a full charge. Allows
over 1,000 card swipes between charges.

Connection and Mounting

Micro-USB B: configured to appear as a vendor-defined HID device, no custom
drivers necessary.
Wireless: configured to appear as a GATT device. Supports personal area network
using standard 2.4GHz frequency space
Wireless Range: Minimum 33 ft. (10 m) in line-of-sight conditions.
eDynamo offers versatile mounting options and can be mounted or hand held. It
requires no wire management or hole drilling.
CON 2
CONNECTION
MOUNTING