Work Area; Electrical Requirements; Electrical Specifications - usi 1800-2700 Owner's Manual

FIND A WORK AREA
A separate work station is required to house your USI laminator. Ample room is necessary to access the
laminator from all 4 sides. If the laminator is back against a wall, the laminating film may back up and jam
the equipment. A USI laminator cabinet is an excellent choice for a work area. It can easily be moved and
provide sufficient storage for film in the cabinet below.
WARNING: Do not place the laminator where the heat shoes will be in the direct path of a room cool-
ing fan, air conditioner or similar forced draft.
Tools necessary to set up your laminator include cutting shears and any adhesive tape. For future service or
maintenance, an assortment of Allen wrenches, a flat head screwdriver and a Phillips head screwdriver are
necessary.

ELECTRICAL REQUIREMENTS

All USI laminators are powered by a standard 120 VAC, three prong outlet.

ELECTRICAL SPECIFICATIONS

Digital ARL18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 amp / 1700 watts
Digital ARL27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 amp / 1540 watts
6