Technical Tips; Q & A - Converters.TV Hand View III Operation Manual

Technical Tips

IMPORTANT! We highly recommend you to comply with the steps of installation otherwise it
will cause you much inconvenience.
1. Make sure your computer's (laptop, notebook or desktop PC) power is turned Off.
2. Connect HAND VIEW III to your TV、VCR or Video Projector supporting the
Video Input or S-VIDEO or RGB ( for Europe system ) Input.
3. Connect HAND VIEW III to monitor.
4. Connect HAND VIEW III to VGA card output of PC.
5. Power on your PC.
6. Connect HAND VIEW III to USB port or PS2 port
7. Turn on your TV/VCR/Projector or Monitor to get the picture on them.
The following are problems that might arise when using the PC to TV
converter, and possible solutions to them.
Q & A:
Q: How can I enhance the display quality?
A: You can usually decrease the contrast and increase brightness control to get the better
picture.
Q: I connect using a NOTEBOOK PC, but no output is displayed on TV.
A: Check your computer's User's Manual for specific instructions for displaying an external
VGA signal or "OUTPUT" .( Typically, Many Notebook computers have 3 settings, VGA
external only, VGA internal only, and VGA internal & external simultaneously)
( optional )of PC.