Specifications:
IMPORTANT! We highly recommend you to comply with the steps of
installation otherwise it will cause you much inconvenience.
1. Make sure your computer's (laptop, notebook or desktop PC) power is
turned Off.
2. Connect
PC VGA to TV Video Converter - View 2000 EX
VCR or Video Projector supporting the Video Input.
: PC VGA to TV Video Converter - View 2000 EX also supports high
Note
quality S-OUT connector and RGB OUT connector. If your TV or VCR
support S-VIDEO IN or RGB VIDEO IN, we highly recommended you to use
it to get the best TV picture.
3.
Connect H cable to PC,
EX
and monitor.
3.
Power on your PC.
4.
Connect the USB or PS/2 power cable to "DC IN" of the converter.
5.
Turn on your TV/VCR/Projector or Monitor to get the picture on them.
Video Type: NTSC, PAL & SECAM (via RGB out)
•
Video Outputs: Composite Video, S-Video and RGB/Y.Cb.Cr
•
Video Output Connections: Composite RCA socket (female), S-
•
Video 4 pin mini-din (female), RGB/Y.Cb.Cr 15 pin D-sub
(female).
PC Input: 15 pin D-sub (female)
•
Power Supply: PC USB port 5vDC supply.
•
Dimensions: 10cm (w), 6cm (d), 2.8cm (h)
•
Weight: 0.085gms
•
PC VGA to TV Video Converter - View 2000
to your TV -
Need help?
Do you have a question about the View 2000 EX and is the answer not in the manual?