Advertisement
Quick Links
(A)
(B)
ASSEMBLY GUIDE
(A)
(G)
(G)
"Kepner" Bench
BENN1 [11.4.12]
TOOLS
• 7/16" Wrench
(Socket wrench recommended)
• Screwdriver/Square bit #1
(Power screwdriver/Square bit #1
recommended)
• Hammer
COMPONENTS
Part
Description
Leg assembly
(A)
(B)
Seat Base
(C)
Carriage bolts
(D)
Flange Nuts
(E)
3" Painted Stainless Screws
(F)
2-1/4" Painted Stainless
Screws
(G)
Seat Braces
Square bit #1
(C)
(E)
Qty
2
1
4
4
4
4
2
1
(D)
(F)
Advertisement
Related Manuals for highwood Kepner
Summary of Contents for highwood Kepner
- Page 1 ASSEMBLY GUIDE “Kepner” Bench BENN1 [11.4.12] TOOLS • 7/16" Wrench (Socket wrench recommended) • Screwdriver/Square bit #1 (Power screwdriver/Square bit #1 recommended) • Hammer COMPONENTS Part Description Leg assembly Seat Base Carriage bolts Flange Nuts 3" Painted Stainless Screws 2-1/4" Painted Stainless...
- Page 2 Attaching Seat Braces Position and hold Leg Assembly (A) and Seat Base (B) together, With the bench flipped upside down, and the Highwood Logo and attach by inserting two Carriage Bolts (C) into the pre-drilled facing you, position Seat Brace (G) under the front leg of the holes on the side of the Seat Base as shown in Image #1.
Need help?
Do you have a question about the Kepner and is the answer not in the manual?
Questions and answers