Installation & Initial Operation - Netafim AlphaDisc Series Quick Manual

13. Installation & Initial Operation
Prior to installation, flush the main line thoroughly to remove large objects that may damage the filter's internal
mechanism.
13.1. INLET AND OUTLET INSTALLATION
Connect the inlet and outlet ports according to the installation configurations described below, keep the service
clearance from both sides, as shown:
Note:
Ensure that the direction of the flow is aligned with the arrows marked on the filter housing.
It is recommended to install inlet and outlet isolation valves.
For added support, the legs included in the carton box may be installed on the single unit (see the single unit
drawings on pages 10-13).
SINGLE IN-LINE
| AlphaDisc Filters quick user guide V1.0
24