Table of Contents
Advertisement
Manual key (used for patterns A to H)
28
Used for manual stitching for the corresponding step during stitching operation.
See Using the Manual Key for further details. (Page 7)
Needle up key (used for patterns A to H)
By pressing this key when the needle is not at the UP position, the sewing machine rotates to the needle UP
29
position and stops.
See Using the Needle UP Key for further details. (Page 7)
Automatic key
30
Used for stitching by toeing the pedal once during stitching operation. See Using the Automatic Key for
further details. (Page 7)
Trimming key
31
Used for thread trimming at the end of step. See Using the Trimming Key for further details. (Page 6)
Step display selection key (used for patterns A to H)
32
Used to change the display at the stitch number display area to step, stitch number. The LED illuminates
when enabled.
Other Keys
Slow start key
33
Used for slow start at the start of stitching.
Sensor key
34
Used for the edge sensor and so on. See Using the Sensor Key for further details. (Page 12)
35
Program key
36
This can be used for customizing (arbitrary input function) using the functions on the main unit control box. See
Using the Program Key for details of simple usage methods. (Page 13)
37
Function key
38
Used to change the display mode. See Using the Function Key for further details. (Page 12)
- 4 -
Advertisement
Table of Contents
