AsReader ASR-010D User Manual

ASR-010D
ASR-020D
Thank you for using the AsReader.
This manual contains important safety instructions
for using the AsReader.
Please read the manual carefully and keep it as long
as you have the device.
※We may refer to the AsReader as "the device" or "this device" in
some sections of this manual.
Inside the Box
The following items are contained in the box. Please
first make sure you have all of these items. In case
that any items are missing, please contact the
company from whom you purchased the device.
AsReader
●
Magnetic Cable
●
Headset extension cable
●
User Manual (this)
●
Parts of AsReader
Trigger button
Magnetic Connector
Battery LED gauge
Before Using
There is a protect seal on the window of the
barcode scanner.
Please remove it before using AsReader.
Safety Instructions
Please read the following instructions carefully
before use
User Manual
...............1 pc
...............1 pc
...............1 pc
...............1 pc
Lightning Connector
LED （Read/charge）
Warning
In order to prevent damage or malfunctions,
Do NOT try to disassemble, modify, or repair the
device by yourself.
Stop using the device if you found any smoke or
abnormal smells emanating from the device.
Do not drop, throw, or stike the device. Do not
expose this device to fire, high temperature or
water. If you notice any damage to the device,
stop using it.
Battery changing by the end user is not
allowed. There is risk of fire, explosion, or burns.
Do not try to recharge the battery when the
device is dripping wet or near any object filled
with liquid. the magnetic connector is not water
proof. Damage may occur if short-circuits or
electrical shorts occur to the parts. Do not
touch these parts with wet hands. Do not try to
use this device in wet environments.
Do not try to use a broken charging cable or
magnetic connector due to risks of electrical
shorts.
Do not put this device on high temperature
surfaces, such as car hoods or dashboards.
Donʼt look at the LED light on the bar code
scanner due the risk of eye damage.
The deviceʼs magnetic connector has a magnet
which may cause some risk of deletion of data on
any magnetic cards.
Therefore, please keep any magnetic cards,
or related items, at least 100mm (4 inches) away
from the device.
Caution
Only use the magnetic cable and magnetic
connector included in the package. Standard
iPhone/iPod touch recharger (5V1A) is strongly
recommended for use with the magnetic cable.
Using different chargers may result in failed
charges.
Please refer to local regulations when you
recycle this device.
Please contact your local purchasing source
immediately if any abnormal incidents occur.
Although this device is designed to be
drip-proof, long expose to rains may damage the
installed iPhone/iPod touch. Please try to avoid
dripping on the device. Wipe any drips from the
device immediately. Do not try to recharge the
device or disconnect the iPhone/iPod touch
when the device is wet; there are risks of liquid
leaking into the device through the connector.
Do not use this device in any circumstance which
may cause significant impact to the device due
to dropping or misuse by the user.