Pilz SDD ES PROFIBUS Operating Manual page 21

SDD ES PROFIBUS
Fieldbus interface
Device type
Log
Station address
Transmission rates
Connection
Galvanic isolation
Times
Supply interruption before de-energisation
Environmental data
Ambient temperature
In accordance with the standard
Temperature range
Storage temperature
In accordance with the standard
Temperature range
Climatic suitability
In accordance with the standard
Humidity
Condensation during operation
Max. operating height above sea level
EMC
Vibration
In accordance with the standard
Frequency
Acceleration
Shock stress
In accordance with the standard
Acceleration
Duration
Protection type
In accordance with the standard
Mounting area (e.g. control cabinet)
Housing
Terminals
Potential isolation
Potential isolation between
Type of potential isolation
Rated surge voltage
Mechanical data
Mounting position
DIN rail
Top hat rail
Operating Manual SDD ES PROFIBUS
1003825-EN-06
Slave
PROFIBUS
1 ... 125d
1,5 MBit/s, 12 MBit/s, 187,5 kBit/s, 19,2 kBit/s, 3
MBit/s, 45,45 kBit/s, 500 kBit/s, 6 MBit/s, 9,6 kBit/
s, 93,75 kBit/s
9-pin D-Sub male connector
yes
20 ms
EN 60068-2-14
0 - 55 °C
EN 60068-2-1/-2
-25 - 70 °C
EN 60068-2-30, EN 60068-2-78
90 % r. h. at 55 °C
Not permitted
2000 m
EN 61000-4-3, EN 61000-4-5, EN 61000-4-6, EN
61000-6-4
EN 60068-2-6
5 - 150 Hz
1g
EN 60068-2-27
15g
11 ms
EN 60529
IP54
IP20
IP20
PROFIBUS and system voltage
Functional insulation
2500 V
Any
35 x 7,5 EN 50022
| 21