Table of Contents
Advertisement
SDD ES PROFIBUS
Menu structure
The LC display has a max. five lines.
It displays information and navigates the menu.
The status of the supply voltage is displayed in the first line, followed by 4 lines containing
the menu levels.
Menu
Menu settings
GPIO-Mapping
Value range
PLC
1-16
Profibus Conf.
Option
SSA
Node ID
Restart
Operating Manual SDD ES PROFIBUS
1003825-EN-06
Settings
Device History
Device Info
Device Event
Value range
On / Off
Locked
1-125
Description
Information about I/O mapping on the connected
safety devices and about the network configuration
of the SDD ES PROFIBUS
Information about previous changes of state (en-
ables and guard locking) of a connected safety
device and status information
Information about the connected safety devices
Message on the change of state of a safety device
Meaning
Value is set by control system
1-16 represents a connected safety device. If the
actuator enable is set for this safety device, the
GPIO is set to 24 V.
If the value ≠ PLC, the control system has no ac-
cess to the input/output channel.
Meaning
SSA status (status when delivered = On)
When SSA = On, the Node-ID is assigned by the
PROFIBUS-DP Master
SSA Lock Telegram set by PROFIBUS-DP Master.
As a result, this station is locked for telegrams. The
lock can be cancelled by setting another SSA value
via the multifunction switch.
Display or change the set Node-ID
Trigger a restart of the SDD ES PROFIBUS in order
to adopt the amended node configuration settings.
| 16
Advertisement
Table of Contents
