Setting The Station Address; System Structure - Pilz SDD ES PROFIBUS Operating Manual

SDD ES PROFIBUS

Setting the station address

The station address of the SDD ES PROFIBUS is set on the display with the multifunction
switch.
1. Press the multifunction switch to change to the menu Settings -> Profibus Config.
2. Make sure that SSA = ON is selected.
3. Switch to the Restart menu and press the multifunction switch to confirm the restart of
the SDD ES PROFIBUS

System structure

Operating Manual SDD ES PROFIBUS
1003825-EN-06
PROFIBUS-DP
Slave 1
PROFIBUS-DP
Master
I1 (FS)
Evaluation device
FS = Failsafe
I2 (FS)
PROFIBUS-DP
Slave 3
PNOZ m ES PROFIBUS
PROFIBUS-DP
Slave 2
Signal inputs and outputs
from other devices
PSEN Y PSEN Y
Junction Junction
Safety Device Safety Device
PROFIBUS-DP
Slave n
FE
0 V
24 V
Safety Device
| 13