OPTIONS ELECTRICAL INSTALLATION • 825 or 850 digital meters, w/optional pulse output DANGER! Be certain the power switch is “OFF” prior to • 2” NPT metallic or non-metallic inlet bung connecting the battery clamps / power cables to the • Wrap around tubular mounting frame power source to prevent unexpected starting of the •...
Page 4
WARNING! Do NOT disable ground prong. Removing IMPORTANT! Do not allow chemicals to remain in the or bypassing the ground prong on a plug eliminates pump for any extended period of time, whereby the the ground connection. Always plug the pump into an chemicals area allowed to “dry out.”...
Page 5
Motor/Gear Assembly Removal Diaphragm Assembly/Check Valve Replacement (cont’d) (Refer to exploded view of pump on page 5.) To further disassemble pump, after #3 above: 1. If possible, position pump with sight caps down. 7. Remove motor and drain oil, if complete disassembly 2.
Parts List Item Description Item Description Pump Body Shaft Lip Seal, 400 Motor Shaft O-Ring Nitrile, -022 Motor Assembly (see charts below for motor specifics) Sight Cap Screw, 1/4 - 10 x 2.25 PTS-SS Bearing Ring Flange Gasket - EPDM Bushing, 1.250 OD.
Kits Description *Kit Contains / (Qty) 400KTF6862 400 (Pre B) Hytrel Rebuild Similar to 400KTH1456 but for A Series Pumps 400KTF6863 400 (Pre B) Santoprene Rebuild Similar to 400KTH1457 but for A Series Pumps 400KTG9137 400 (Pre B) Santoprene Diaphragms Similar to (2) 400KTH1178 but for A Series Pumps 400KTG9168 Retrofit for Pump and Meter...
Anti-Drip Nozzle Spout Kit 400KTF0237 For use with Norwesco and other nozzles Anti-Drip Nozzle Spout with a 1 - 3/16” outside diameter. Installation Nozzle 1. If there is a raised plastic notch on the nozzle, carefully remove it with a file before installing the Anti-Drip Spout.
Page 12
Model / Accessories / Configuration Information Sotera Systems Pumps Model Motor Diaphragms Seals Inlet Accessories SS411BCEXP 12V DC CE Compliant Santoprene Page 8: Configuration FF No Accessories Explosion Proof EPDM SS413BCEXPPG 12V DC CE Compliant Santoprene Page 8: Configuration Pump-N-Go; 2" Female Camlock Coupler w/ 2" Female NPT Explosion Proof EPDM Threads;...
Page 13
Model / Accessories / Configuration Information (cont’d) Sotera Systems Pumps (cont’d) Model Motor Diaphragms Seals Inlet Accessories SS445BX700 12V DC Mix-N-Go System; 825 Meter; 1" x 12 ' EPDM Hose; 1" Ball Valve Nozzle; Poly Telescoping Suction Tube w/ Bellows (28½" x 45½"); Santoprene Page 7: Check Valve;...
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Pump won’t prime • Suction line problem • Check for leaks in suction line. • Leaky check valves • Check for dirt or damaged check valves and replace. • Check valves improperly installed • Check for proper installation. See below. •...
Revision Date: August 1, 2014 Fill-Rite and Sotera Products Tuthill Transfer Systems (“Manufacturer’) warrants each consumer buyer its products (“Buyer”) from date of sale that goods of its manufacture (“Goods”) shall be free from defects of materials and workmanship. The duration of the warranty is as follows:...
Page 16
8825 Aviation Drive | Fort Wayne, Indiana 46809 P (800) 634-2695 | (260) 747-7524 F (800) 866-4861 www.sotera.com www.tuthill.com Tuthill UK LTD. Birkdale Close Manners Industrial Estate Ilkeston, Derbyshire DE7 8YA P +44 0 115 932 5226 F +44 0 115 932 4816...
Need help?
Do you have a question about the SOTERA 400B Series and is the answer not in the manual?
Questions and answers