Step 1; Step 2 - modway Vivify EEI-2852 Manual

EEI –2852
DESK

STEP 1:

Put Top Frame (A) upside down on a carpeted or padded surface.
Place 4 pieces of Leg (B) to Top Frame (A) as shown.
Insert 8 pieces of Short Bolt I (1) into the pre-drilled holes on Top Frame (A) through the pre-drilled holes on Legs (B).
Use Allen Wrench (6) to tighten Short Bolts I (1). Do not fully tighten Short Bolts I (1) at this step.
1x8 6x1

STEP 2:

Put Bottom Rails (E) and Back Rail (D) to the assembled Top Frame (A) and Legs (B) as shown.
Insert 4 pieces of Long Bolt (2) into the pre-drilled holes on Back Rail (D) through the pre-drilled holes on Bottom Rail (E).
Insert 4 pieces of Medium Bolt (4) into the pre-drilled holes on Side Rails (E) and Back Rail (D) through the pre-drilled holes
on Legs (B).
Insert 4 pieces of Short Bolt I (1) into the pre-drilled holes on Side Rails (E) and Back Rail (D) through the pre-drilled holes
on Legs (B).
Use Allen Wrench (6) to tighten all the Bolts (1&2&4). Do not fully tighten all the Bolts (1&2&4) at this step.
2
1x4 2x4
Customer Service 908-368-1025︱www.modwayfurniture.com
B
B
1
1
1
3
2
C
C
6
1
4
D
E
2
1
4
1
B
B
4x4 6x1
1
B
A
1 1
E
2
D
4
2
6
B
D
1
A
B
1
1
Hardware & Tools required
E
B
1
4
E
2
4
2
B
B
Hardware & Tools required
Page 2 of 4