Step 1; Step 2 - modway Conduit EEI-2799 Manual

EEI–2799/2800

STEP 1:

Please put Bar Stool Back (1) on a carpeted or padded area.
Place Bar Stool Seat (2) to
Insert 4 pieces of Long Bolt (B) with 4 pieces of Flat Washer (C) into the holes on Bar Stool Back (1) through the holes on
Bar Stool Seat (2) .
Use Allen Wrench (D) to tighten Long Bolts (B). Do not fully tighten Long Bolts (B) at this step.
Bx4

STEP 2:

Place Stretchers (4) to the assembled Bar Stool Back (1) , and Bar Stool Seat (2) as shown.
Insert 4 pieces of Short Bolt (A) with 4 pieces of Flat Washer (C) into the holes on Bar Stool Back (1) through the holes on
Stretchers (4).
Use Allen Wrench (D) to tighten Short Bolts (A). Do not fully tighten Short Bolts (A) at this step.
D
A
C
Ax4 Cx4
Customer Service 908-368-1025︱www.modwayfurniture.com
BAR STOOL
Bar Stool Back (1) as shown.
Cx4 Dx1
4
4
A
C
Dx1
D
B
C
B
1
C
2
2
Hardware & Tool required
1
Hardware & Tool required
Page 2 of 4