Rangemaster ECL45SCBL/BL User Manual & Installation & Service Instructions page 27

Table of Contents

Advertisement

The oven light is not working
If the steam oven is operating as normal, the likelihood is the
bulb is out.
1.
Remove all shelves and the grill pan from the oven.
2.
Gently unclip the side rack from its lower locating stud
and unhook its top to remove it.
No tools are required and the stud should not be
n
removed.
3.
Carefully detach the glass cover from the lamp holder,
by sliding it upward then easing the bottom outward
Fig. 2.6.
4.
Carefully remove the old bulb and insert a new bulb,
suitable for high temperatures (300ºC) having the
following specifications: 230-240V, 50Hz, 25W, G9 fitting.
5.
Insert the new bulb taking care not to touch the glass
with your hands as contamination from your fingers can
cause premature failure. Always use a clean cloth or
gloves.
6.
Reattach the glass cover, pressing it firmly into position.
7.
Replace the side rack by locating the two hooks at the
top and clipping it back into position on its lower fixing
stud.
8.
Replace the oven shelves and grill pan as necessary.
25
Fig. 2.6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmb45scbl/ss

Table of Contents