Upper Side; Bottom Side - Panasonic AK-UB300 Operating Instructions Manual

Description of parts

Upper side

1 Drop prevention wire mounting screw hole
f Mounting hole size
- M4
2 Mounting screw holes
This is used when installing in a camera housing, etc.
f Mounting hole size
- 1/4-20 UNC (x 3)
@ NOTE
t Depth of the screw hole is 10 mm. Use mounting screws 10 mm or shorter.
3 Cooling fan
This is the fan for cooling the unit.
f Do not block or disturb the ventilation while operation. Doing so may cause fire due to overheating.
f Expected life of this fan is approximately 60,000 hours. (When used at room temperature of 25 ºC)
Replace when it reaches the expected life.
f Be sure to contact your dealer for the replacement.

Bottom side

1 Mounting screw holes
This is used when installing in the camera housing, or attaching the pan head or the tripod.
f Mounting hole size
- 1/4-20 UNC (x 3)
- 3/8-16 UNC (x 2)
@ NOTE
t Depth of the screw hole is 10 mm. Use mounting screws 10 mm or shorter.
44
1 2
1
3