Initial Operation; Maintenance Work; Technical Data - Chamberlain SLY300E Mechanical Installation

INITIAL OPERATION

Check gate functionality manually when the drive has been
disengaged. Electrical operation is only possible with the control unit
that is supplied as standard.
Electrical connections: See control unit instructions.
Always ensure that the mechanical and electrical safety requirements
relevant to the given system are complied with. fig. 10

MAINTENANCE WORK

The drive mechanics are maintenance-free. Check at regular
intervals (monthly) that the gate hardware and the drive are all firmly
in place. Disengage the drive and check gate functionality. Only an
easy-running gate will work well with a drive. A drive is no substitute
for a poorly functioning gate.
A sliding gate can also be secured by implementing on-site
measures (fence, wall, etc.). See fig. 11.
709269E-GB - 11.2005
D e c l a r a t i o n o f C o n f o r m i t y
Automatic Gate Opener Models SLY300/E/K, SLY500/E/K, SLY1000/E/K Series
are in conformity to the applicable
sections of StandardsEN300220-3 • EN55014 • EN61000-3 • EN60555, EN60335-1 • ETS
300 683 • EN60335-1: 2002 • EN60335-2-103: 2003 • EN55014-1: 2000 + A1 + A2 •
EN55014-2: 2001 • EN61000-3-2: 2000 • EN61000-3-3: 1995 + A1 • EN 301 489-3,
V1.3.1 • EN 300 220-3 V1.1.1 • EN13241-1
per the provisions & all amendments
of the EU Directives ..................................................73/23/EEC, 89/336EEC, 1999/5/EG
D e c l a r a t i o n o f I n c o r p o r a t i o n
Automatic Gate Opener Models , when installed and maintained according to all the
Manufacturer's instructions in combination with a Gate, which has also been installed and
maintained according to all the Manufacturer's instructions, meets the provisions of EU
Directive 89/392/EEC and all amendments.
I, the undersigned, hereby declare that the equipment
specified above and any accessory listed in the manual
B.P.Kelkhoff
Manager, Regulatory Affairs
Chamberlain GmbH
D-66793 Saarwellingen
October, 2005
© Chamberlain GmbH 2005

TECHNICAL DATA

SLY300
Voltage IN 230Volt
Frequency 50Hz
Power 300W
Current rated 1.3A
Torque 9Nm
Capacitor 8μF
Therminal Overload
Protection 140°
Motor Speed 1400
Travel Speed 12
Duty Cycle 30
Working Temperatur
Range -20
Protection Class IP44
Degree of Protection I
Weight 9
approx. Gate Length 5m
Max. Gate weight at
max. length (incl.
20% reserve) 300kg
conforms to the above Directives and Standard
SLY500 SLY1000
230Volt 230Volt
50Hz 50Hz
360W 480W
1.5A 2.1A
10Nm 12Nm
10μF 16μF
140° 140°
1400 1400
12 11.5
30 30
O C - 55 O C -20 O C - 55 O C -20
IP44 IP44
I I
9 10
8m 10m
500kg 1000kg
s.
O C - 55 O C