Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Voxx Electronics Manuals
  4. Remote Starter
  5. Prestige APS510Z
  6. Installation and reference manual

Voxx Electronics Prestige APS510Z Installation And Reference Manual

Vehicle security / keyless entry system
Hide thumbs Also See for Prestige APS510Z:

Advertisement

Quick Links

Download this manual
Thank you for trusting Prestige products! If you are a consumer, please note:
Professional installation is strongly recommended.
This manual assumes the installer has adequate knowledge of the following expertise. Therefore, it does not
cover these topics in detail:
•
12-volt electronics
•
Testing and verifying circuits
•
Making safe and lasting wiring connections
•
Factory ignition, power, lighting, data bus and sensing systems
•
Factory systems and components to avoid
•
Safe wire routing, circuit protection and product placement
•
Access to vehicle-specific technical information
In addition, this manual assumes the installer has the proper tools, skill and facilities to perform a professional installation.
Performing an improper installation could result in damage to the vehicle or its components, improper system function,
unsafe vehicle operation or physical injury. Such instances would not be covered by the vehicle manufacturer's warranty,
nor by Voxx Electronics, Inc.
Detailed Descriptions
2
Wire Harness Colors and Functions
2
Power / Notification Connector
3
Input / Output Connector
4
Door Lock Connector
5
External Components
5
Shock Sensor
5
RF Antenna Kit
5
Data Bus Interface (DBI)
5
Telematics
5
Weblink Programming
6
Setup Options
6
Remote Programming
7
Security Control
11
System Operation
11
Remote Operation
2020 Voxx Electronics Corporation. All rights reserved.
APS510Z
Vehicle Security / Keyless Entry System
Installation and Reference Guide
Quick Reference
12
System Programming
12
Programming Mode Entry / Exit
13
Feature Bank Options
13
Data Port Protocol
14
Dome Light
14
Silent Arm and Disarm
14
User Selectable LED
14
System Diagnostics
14
Troubleshooting Trigger Zones
14
Adjusting Shock Sensor
15
Alarm Override Procedures
16
Wiring Diagrams
16
Door Lock Connections
19
Starter Kill Relay
20
Full System Connections
APS510Z_RevC_08/20

Advertisement

loading
Need help?

Need help?

Do you have a question about the Prestige APS510Z and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Voxx Electronics Prestige APS510Z

Summary of Contents for Voxx Electronics Prestige APS510Z

  • Page 1 Troubleshooting Trigger Zones Weblink Programming Adjusting Shock Sensor Alarm Override Procedures Setup Options Remote Programming Wiring Diagrams Security Control Door Lock Connections Starter Kill Relay System Operation Full System Connections Remote Operation 2020 Voxx Electronics Corporation. All rights reserved. APS510Z_RevC_08/20...
  • Page 2 Detailed Descriptions: Wire Harness Colors and Functions Power / Notification Connector (6-pin connector) See page 20 for the full system diagram. These wires are listed in order of their placement in the harness connector. 1 3 5 2 4 6 1.
  • Page 3 Detailed Descriptions: Wire Harness Colors and Functions Input / Output Connector (14-pin connector) See page 20 for the full system diagram. These wires are listed in order of their placement in the harness connector. 3 5 7 9 11 13 4 6 8 10 12 14 1.
  • Page 4 Detailed Descriptions: Wire Harness Colors and Functions Input / Output Connector (14-pin connector) (Cont.) See page 20 for the full system diagram. These wires are listed in order of their placement in the harness connector. 10. Empty This position is empty on this harness. 11.
  • Page 5 Detailed Descriptions: External Components Shock Sensor The shock sensor plugs into a 4-pin connector on the Prestige module. It should be securely attached to a vehicle surface or sturdy wire harness. Testing takes place after all connections are made and the system is powered up. Refer to Quick Reference: System Diagnostics on page 14 for instructions on testing and adjusting the shock sensor.
  • Page 6 Detailed Descriptions: Setup Options Bank 1: Add / Remove Remote Controls Remote programming is located in Feature Bank 1. This system will Auto Program basic functions of the remote with one (1) button press. Basic functions are channels 1-3, Lock, Unlock, and Trunk / Start. Feature Bank 1 Descrip�on 1 Auto Program/Lock...
  • Page 7 Detailed Descriptions: Setup Options Security Control (Bank 2) See page 12 for Programming Instruction. Op�ons Feature Bank 2 1 Chirp 2 Chirp 3 Chirp 4 Chirp 5 Chirp 6 Chirp 1 Lock / Unlock Func�on 500ms 3.5sec 500ms L, DBL UL DBL L, 500ms UL DBL L, DBL UL 500ms L, 350ms UL...
  • Page 8 Detailed Descriptions: Setup Options Security Control (Bank 2) (cont.) See page 12 for Programming Instruction. Feature 4: Exterior Illumination Function: Set the parking lights and head lights to remain on for 30 seconds when the doors are locked or unlocked with the remote control.
  • Page 9 Detailed Descriptions: Setup Options Security Control (Bank 2) (Cont.) See page 12 for Programming Instruction. Feature 9: Override Method Function: Set the Alarm Override Method. This will be used if the Remote is lost or inoperable. Setting Choices: • Option 1 - Alarm Override method is normal. Ignition Key ON, press Valet button 1x •...
  • Page 10 Detailed Descriptions: Setup Options Security Control (Bank 2) (Cont.) See page 12 for Programming Instruction. Feature 15: Alarm Trigger Length Function: Set the length of time the Alarm Notification will sound for each cycle. Setting Choices: • Option 1 - 30 seconds, System will Alarm Cycle will sound for 30 second. •...

  • Page 11: Remote Control Operation

    Detailed Descriptions: System Operation Remote Control Operation This system includes two (2) 1-Way five (5) button remotes. The matrix below describes the basic functions of each remote. See Owners Guide for complete remote operation matrix. Five Button Remotes (1-Way & 2-Way LED) Bu�on Ac�on Func�on...
  • Page 12 Quick Reference: System Programming Programming Mode Entry and Exit Procedure Once the system is installed and powered up, you will use the vehicle ignition, override button and a programmed remote control to set all system options. Feature options are divided into categories, or Banks, as described throughout this section.
  • Page 13 Quick Reference: System Programming Bank 1: Transmitter Programming Options See pages 6 for a detailed description. Feature Bank 1 Descrip�on 1 Auto Program/Lock Press Lock bu�on on remote 2 Unlock Press Unlock bu�on on remote 3 Trunk/Start Press Trunk/Start bu�on on remote 4 Ch.
  • Page 14 Quick Reference: System Programming & Diagnostics Dome Light Delay To program the Prestige system to wait until the dome light turns off before arming: 1. Close all doors. 2. With the vehicle ignition off, press LOCK, UNLOCK, LOCK ,UNLOCK, LOCK, UNLOCK, LOCK on the remote control. The dash-mounted LED will turn on.
  • Page 15 Quick Reference: Alarm Override Procedures Valet Alarm Override The Valet Override procedure will disable the alarm when the remote is not available or has become inoperative. If the vehicle door is opened without disarming, the alarm will sound and the vehicle will not start when attempting to start with the key.
  • Page 16 Quick Reference: Wiring Diagrams Door Lock Connections Negative-Trigger Door Locks Verification: The vehicle wires register Ground when the Lock and Unlock switches are activated. RED ( - ) Lock Output Lock Vehicle Door Lock Control Relays Unlock GREEN ( - ) Unlock Output Positive-Trigger Door Locks Verification: The vehicle wires register 12V+ when the Lock and Unlock switches are activated.
  • Page 17 Quick Reference: Wiring Diagrams Door Lock Connections Single-Wire Negative Multiplex Door Locks (Relays required) Verification: The vehicle wire registers variable Ground values when the Lock and Unlock switches are activated. Please consult the vehicle-specific wire and location chart for resistor values. Ground Fused +12 Volt RED ( - ) Lock Output...
  • Page 18 Quick Reference: Wiring Diagrams Door Lock Connections Reverse-Polarity Door Locks (Relays required) Verification: The vehicle wires rest at Ground and register 12V+ when the Lock and Unlock switches are activated. Fused +12 Volt Battery Souce RED ( - ) Lock Output Lock To Door Lock Motor Unlock...
  • Page 19 Quick Reference: Wiring Diagrams Starter Kill / Anti-Grind Relay Connections Included Starter Kill / Anti-Grind Relay To ORANGE - Starter Kill / To Vehicle Ignition Anti-Grind Output (-) From Alarm APS510Z_RevC_08/20...
  • Page 20 Quick Reference: Wiring Diagrams APS510Z_RevC_08/20...