Remote engine starter with alarm system (21 pages)
Summary of Contents for Voxx Electronics Prestige PE1BTWZ
Page 1
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information. 2018 Voxx Electronics Corporation. All rights reserved.
Table of Contents Using Your Remote Control ..............3 Arming the Security System .............. 3 Disarming the Security System ............3 Two Stage Door Unlock (optional) ............. 3 Bypassing the Shock Sensor ............3 Alarm City Mode ................4 User Selectable Notification Chirps ........... 4 User Selectable LED .................
To Arm the Alarm the bypass both detection stages press the button 3 times within 5 seconds. *Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more than 3 seconds. 2018 Voxx Electronics Corporation. All rights reserved.
City Mode City Mode allows the user to change the sound of the alarm system to make it easily identified when the alarm is trigger. To enter City Mode press the button 4 times within 10 seconds. User Selectable Notification Chirps System ARM/DISARM chirps can be toggled ON or OFF without entering the programming feature banks.
Within 10 seconds, press and release the Brake pedal 3 times. The alarm system will stop sounding and enter the (by-passed) mode. You can now start and operate the vehicle normally. This feature must be programmed ON by an autorized dealer. 2018 Voxx Electronics Corporation. All rights reserved.
Page 6
Custom Code Valet Override (Optional) Unlike the default Valet Override, Custom Code Override is a user personalized code that offers a higher lever of security. If the user chooses to use Custom Code Override, Feature Bank 2 ; Feature 9 must be programmed for “Custom Code”. Once the option has been selected the code must be programmed.
Zone 2 Trigger, Trunk / Hood 3 Flashes / Disarmed Zone 3 Trigger, Door Siren/Horn Chirp Indications Chirps Function Disarm Door Ajar Upon Arming Disarm / Triggered Parking Light Flash Indications Flashes Function Disarm Disarm / Triggered 2018 Voxx Electronics Corporation. All rights reserved.
Page 8
2 Way Remote Control Notifications FUNCTION BEEPS / LED FLASHES Lock 1 Beep / Flash Unlock 2 Beeps / Flashes Alarm Trigger Event 2 Beeps / LED Flash per 3 seconds - Repeats 9 times APSSEC PE1BTWZ Owners revA...
2. Remove the old battery, observing the +/- symbols on the batteries and replace with a new battery. 3. Reassemble the halves of the remote control 4. Test operation of the remote control. 2018 Voxx Electronics Corporation. All rights reserved.
LIMITED LIFETIME WARRANTY Applies to Prestige Series Control Modules, Sirens, Sensors, and Relays. Voxx Electronics Corporation (the Company) warrants to the original purchaser of this product that should this product or any part thereof, (other than transmitters) under nor- mal use and conditions, be proven defective in material or workmanship during the life-...
Page 11
2. This device must accept any interference received, including any interference that may cause undesired operation. Warning! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. PATENTED: www.voxxintl.com/company/patents 2018 Voxx Electronics Corporation. All rights reserved.
Need help?
Do you have a question about the Prestige PE1BTWZ and is the answer not in the manual?
Questions and answers