Creating A New Beam Mode - Simrad ME70 Operator's Manual

Simrad ME70
3 Click one of the numbers to select one of the four most recent beam modes.
Tip
The four numbers in the
the four beam modes listed at the top of the
dialog box. This list is sorted alphabetically. To control which
Administration
modes to choose using the four numbers, name your beam modes accordingly, for
example by means of prefixes.
4 Click the centre button to select a new beam mode from a submenu.
Note
When a new mode is selected, the program will terminate the current normal
operation and return to inactive. Normal operation must then be selected to use
the new mode.

Creating a new beam mode

Purpose
This procedure explains how to create a new beam mode.
Related topics
• Beam mode procedures on page 63
• Selecting beam mode for operational use on page 63
• Creating a new beam mode on page 64
• Editing a new or existing beam mode on page 65
• Deleting a beam mode that is no longer required on page 66
• Exporting and importing beam mode XML files on page 66
Procedure
Observe the
1
Main
presentation.
Click the icon.
2
Setup
This icon is located under the
used to open the
Click
3
Beam Mode Adm
dialog box.
Administration
The
Beam Mode Administration
modes for the ME70 system. By means of the
view and edit the beam modes.
In the
4
Beam Mode Administration
64
button at the top of the
Beam Mode
menu. It is located on the right hand side of the ME70
menu. It is
Main
menu.
Setup
to open the
Beam Mode
dialog box allows you to create and delete beam
dialog box, click
Main
list in the
Beam Modes
dialog box you can also
Beam Mode
.
New
menu will select
Beam Mode
378945/B