Defining The Gain Settings - Simrad ME70 Operator's Manual

Procedure
The following methods may be used.
1
Method 1
a Click [+] or [-] to adjust the start range manually.
2
Method 2
Click the middle of the button, hold the mouse button depressed, and drag
a
sideways.
3
Method 3
a Click the middle of the button to open it.
b Type any depth value from the keyboard.
Click
c
Apply to all
current echograms of the same type. This choice will also apply to the other
methods.
4
Method 4
Place the cursor over the middle part of the button, and use the control wheel
a
on the mouse (or trackball) to choose range value.

Defining the gain settings

Purpose
This procedure explains how to change the gain.
Description
The function controls the display gain.
Gain
The value controlled by the
dialog box.
Scale
Changing the colour scale with the
are shifted with the same value, and the colour step is kept constant.
Maximum Level
Tip
Do not confuse this
Gain
Procedure
Observe the
1
Main
presentation.
2 Observe the
Gain
Note that there are two
settings for the two TVG settings.
378945/B
if you wish to implement your chosen depth value to all
button is the same as the
Gain
button implies that the
Gain
function with the
TVG
menu. It is located on the right hand side of the ME70
button on the menu.
Main
buttons. This allows you to define individual gain
Gain
Minimum Level
Minimum Level
function.
Getting started
of the
Colour
and
33