Table of Contents
Advertisement
2. Quick Install Guide
The EIB168RC RadioLINK Base must be installed by a licensed electrician.
The maximum number of RadioLINK Alarms in each system is 12. If your system
has more than 12 Alarms please consult your supplier or contact tech support (see
back page).
Install each RadioLINK Base in the centre of the
ceiling at least 0.30m from light fittings as per
the Smoke/Heat Alarm instructions and connect
to nearest mains circuit.
Slide Alarm on to the EIB168RC RadioLINK Base.
This will automatically activate the rechargeable
back-up cells in the base.
Repeat this procedure for all Alarms in the
system.
6
Advertisement
Table of Contents
