Table of Contents
Advertisement
Slide the Alarm head onto the base. Connect the
mains power to the alarm circuit.
Wait 10 seconds and check that the green led on
the Alarm cover is on indicating that mains power
is present.
If the blue light flashes every 10
seconds, remove the alarm and
manually depress the rechargeable
cell "on" switch as shown and refit
the alarm. If there is still a problem
the cells may be depleted so leave
the unit on mains power for 2
hours to charge and test again.
Press and hold the test button. The red led will flash
and the horn will sound.
Repeat this installation procedure for all RadioLINK
bases in the system.
12
Advertisement
Table of Contents
