RadioLink EIB168RC Instructions Manual page 25

Alarm base
Table of Contents

Advertisement

- at least weekly. This is to determine whether there are sources of interference
preventing communication. The radio paths may be disrupted by moving furniture or
renovations, and so regular testing will help identify these and other faults, so that
they can be rectified (see Section 5).
(ii) Receivers may be blocked by radio signals occurring on or near their operating
frequencies, regardless of the House Coding. The EIB168RC RadioLINK Base is in
compliance with AS/NZS4268:2012, and has been proven to provide reasonable
protection against harmful interference in residential installations. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause interference to radio and/or television
reception.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause such interference, which can be verified by
turning the RadioLINK device on and off (remove both the mains and turn off backup
power supplies), the user is encouraged to eliminate the interference by one or more
of the following measures:
(i) Re-orientate or re-locate the unit.
(ii) Increase the distance between the EIB168RC and the device being affected.
(iii) Connect the device being affected to a mains outlet on a circuit different from
the one that supplies the EIB168RC.
(iv) Consult the supplier or an experienced radio/television technician.
24

Advertisement

Table of Contents
loading

Related Products for RadioLink EIB168RC

Table of Contents