What To Do In The Event Of A Fault; Appliance - Gaggenau RW414964 User Manual

What to do in the event of a fault

en
W hat to do in the event of a fault
3
B efore you call Customer Service, use this table to check whether you can rectify the fault yourself.
W h a t t o d o i n t h e e v e n t o f a f a u l t

Appliance

Temperature differs greatly from the set value.
Displays do not illuminate.
The mains plug has not been inserted properly.
The fuse has been tripped.
The power has failed.
The refrigeration unit is switching on more frequently and for longer.
The appliance has been opened frequently.
The ventilation openings are covered up.
Large quantities of fresh food have been put in.
Appliance is not cooling, display and lighting are lit.
Demo mode is switched on.
The door does not open when pressed.
A special mode has switched off automatic door opening.
Pull-to-open is switched on.
The opening force is set too high.
The fuse has tripped.
The power has failed.
--------
22
Switch off appliance for 5 minutes.
"Switching off and disconnecting the appliance"
~
on page 11
If the temperature is too warm, check temperature again after
a couple of hours.
If the temperature is too cold, check temperature again on the
following day.
Connect mains plug.
Check the fuses.
Check whether the power is on.
Do not open the appliance unnecessarily.
Remove obstructions.
Switch on super cooling promptly in advance.
Switch Demo mode off.
"Switching demo mode on or off" on page 14
~
To open the door, reach from below under the bottom panel
of the unit or switch off special mode.
"Switching rest mode on or off" on page 14
~
Switch the appliance to Push-to-open.
"Automatic door opening" on page 14
~
Select a lower setting for the opening force.
"Automatic door opening" on page 14
~
Check the fuses.
Check whether the power is on.