Controls And Connectivity; Control Buttons; Connectivity - go sat GS3260 User Manual

CONTROLS AND CONECTIVITY
Fixed installation to a surface
We recommend referring the installation to qualified personnel. Some steps require the assistance of
more people. Also follow other safety instructions that are not included in this section of the manual.
• Use only a holder that complies with the specification and design of your TV.
• Make sure the surface is suitable for installation, stable and capable of supporting the weight
of the TV.
• Follow the holder manufacturer's instructions.
• Secure the holder to the surface by means that are suitable for the surface type and which
comply with mounting requirements of the holder´s manufacturer.
• Take extra care when installing the cable lines and ensure that the installation is safe.

2) Controls and connectivity

2.1 Control buttons

There is a panel with backup control buttons on the TV, in case a standard remote control is not avai-
lable.
Use the UP and DOWN buttons to switch the channel according to their list order or to navigate in the
displayed menu.
Use the LEFT and RIGHT buttons to adjust the audio volume or to navigate through the displayed
menu.
Press the ON/MENU button to turn on the TV from standby mode, display the menu, or confirm your
selection. Hold this button to bring up an alternative menu.
EN 6

2.2 Connectivity

Note: The location, design, and name of each button may vary depending on your TV model.
Ethernet port (RJ45) - for connection to a local network / Internet.
Digital audio output (coaxial) / SPDIF- allows the TV to be
connected to a compatible audio device using a digital cable.
Satellite input (F connector) – allows the connection of satellite
parabolic antennas.
Antenna input (IEC connector) - allows the connection
of a terrestrial antenna, or cable television.
Headphone Out (Jack 3.5mm) - connection for headphones
and others audio equipment.
HDMI - connects the TV to other devices equipped with a HDMI
output, e.g. personal computer, DVD player, satellite receiver, etc.
HDMI interface provides uncompressed digital communication
between devices.
Note: The number and location of each HDMI connector may vary
depending on the TV model.
USB connector – allows USB device connection.
HDMI ARC (Audio Return Channel) - this function is supported
only for a connector labeled HDMI ARC.
AV audio + video - connects to an analog signal source using
the included adapter.
CI + interface - used to connect a CI+ module with a conditional
access card for enabling scrambled content. More information
in a separate chapter „CI + interface".
CONTROLS AND CONECTIVITY
EN 7