Trim Meter; Hour Meter; Low Oil Pressure-Alert Indicator; Overheat-Alert Indicator - Yamaha F90 Owner's Manual

Hide thumbs Also See for F90:
Table of Contents

Advertisement

Instruments and indicators
EMU26622

Trim meter

This meter shows the trim angle of your out-
board motor.
Memorize the trim angles that work best for
your boat under different conditions. Ad-
just the trim angle to the desired using the
power trim and tilt switch.
If the trim angle of your motor exceeds the
trim operating range, the top segment on
the trim meter display will blink.
EMU26652

Hour meter

This meter shows the number of hours the
engine has been run. It can be set to show the
total number of hours or the number of hours
for the current trip. The display can also be
turned on and off.
To change the display format, press the
"
" (mode) button. The display can show
total hours or trip hours, or turn off.
38
To reset the trip hours, simultaneously press
the "
more than 1 second while the trip hours are
displayed. This resets the trip counter to 0
(zero).
The total number of hours the engine has
been run cannot be reset.
EMU26526

Low oil pressure-alert indicator

If oil pressure drops too low, the alert indica-
tor will start to blink. For further information,
see page 45.
ECM00024
NOTICE
Do not continue to run the engine if the
low oil pressure-alert indicator is on and
the engine oil level is lower. Serious en-
gine damage will occur.
The low oil pressure-alert indicator does
not indicate the engine oil level. Use the
ZMU01740
oil dipstick to check the oil level. For fur-
ther information, see page 52.
1. Low oil pressure-alert indicator
EMU26584

Overheat-alert indicator

If the engine temperature rises too high, the
alert indicator will start to blink. For further in-
ZMU01741
formation on reading the indicator, see page
45.
" (set) and "
" (mode) buttons for
1
ZMU01736

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents