Basic components
warning indicators only operate when the en-
gine is equipped with the appropriate func-
tions.
EMU26540
Oil level indicators (three indicators)
The indicators on the gauge show the status
of the oil level. For details on how to read the
indicators, see page 28.
ECM00030
CAUTION:
Do not operate the engine without oil. Se-
rious engine damage will occur.
1. Oil level indicators
EMU26550
Oil level indicator (digital type)
This indicator shows the engine oil level. If
the oil level falls below the lower limit, the
warning indicator will start to blink. For fur-
ther information, see page 21.
ECM00030
CAUTION:
Do not operate the engine without oil. Se-
rious engine damage will occur.
19
1. Oil level indicator
EMU26581
Overheat warning indicator (digital
type)
If the engine temperature rises too high, the
warning indicator will start to blink. For fur-
ther information on reading the indicator, see
page 20.
1
ECM00050
CAUTION:
Do not continue to run the engine if the
ZMU04580
overheat warning indicator is on. Serious
engine damage will occur.
1
1. Overheat warning indicator
EMU26610
Trim meter
This gauge shows the trim angle of your out-
board motor.
1
ZMU01867
ZMU01868