Technical data
Hole size in deck:
Spout
Minimum: 1 1/4"
Maximum: 1 5/8"
Valve
Minimum: 1 1/8"
Maximum: 1 1/4"
Operating pressure:
Recommended operating press.: 14.7 - 72.5 psi
Test pressure:
Hot water temperature:
Recommended hot water temp.: 149° F
max. 147 psi
232 psi
max. 176° F
Assembly
1. Flush pipe lines thoroughly.
2. Mount spout and valves onto lavatory.
3. Screw pop-up rod onto the pop-up rod exten-
ding from faucet.
4. Connect flex hose with valves.
5. Attach handle trim and connect pop-up assem-
bly. The hot water supply should be connected
to the left and the cold on the right.
6. Turn on angle stops and check function of
faucet.
7. Check all connections for leakage.
Major pressure differences between cold
and hot water in supply should be avoi-
ded and balanced.
3