Advertisement
Standards and certificates
Disposal notes
Mechanical design
LME39...
Indication and
diagnostics
Display and
communication
Time parameters
6/17
Building Technologies
HVAC Products
Conformity to EEC directives
- Electromagnetic compatibility EMC (immunity)
- Directive for gas-fired appliances
ISO 9001: 2000
ISO 14001: 2004
Cert. 00739
Cert. 38233
Identification code to EN 298
LME39.100...
LME39.400...
The unit contains electrical and electronic components and must not be disposed of to-
gether with domestic waste.
Local and currently valid legislation must be observed.
•
The housing is made of impact-proof, heat-resistant and flame-retarding plastic. It is of
plug-in design and engages audibly in the base
•
Burner controls LME39... and plug-in base AGK11.6 are silver-grey (RAL7001)
•
The housing accommodates the
- microcontroller for the control sequence and the control relays for load control
- electronic flame signal amplifier (ionization)
- lockout reset button with its integrated 3-color signal lamp (LED) for operational
status and fault status messages and the socket for connecting the OCI400 inter-
face adapter
•
The AZL2... display and operating unit is for direct connection to the burner control. All
safety-related digital inputs and outputs of the system are monitored by the contact
feedback network. Operation and parameterization of the LME39... is accomplished
with the AZL2... or via the OCI410... / ACS410
•
Unlimited burner capacity (thermal output on startup ≤120 kW)
•
3 repetitions in the event of loss of flame during operation (can be parameterized)
•
Multicolor indication of operational status and fault status messages
•
Forwarding of operational status messages, fault status messages and full service
information via additional OCI400 / OCI410... interface adapter and Windows ACS410
PC software
RJ11 jack for connection of the AZL2... display and operating unit or the OCI410... inter-
face adapter for communication and parameterization via Windows ACS410 PC tool.
The most important time parameters for the program:
−
Prepurge time (t1)
−
Preignition time (t3)
−
Postignition time (t3n)
−
Interval (t4)
−
Postpurge time 1 (t8-1)
−
Opening time for actuators (t11)
−
Closing time for actuators (t12)
Both the prepurge time and the safety times are safety-related and can be changed by the
OEM with the help of the display and operating unit.
F T C L B N
A B C L B N
2004/108/EC
90/396/EEC
CC1N7106en
20.02.2008
Advertisement
