Table of Contents
Advertisement
English
13. The noise appears on the
screen.
14. The <Smoothing> cannot be
selected.
15. The Main menu of
ScreenManager does not
operate.
16. The Auto Adjustment Button
does not operate.
17. USB function cannot be setup.
18. PC is hung up. / The peripherals
connected to the downstream
ports do not operate.
38
7. TROUBLESHOOTING
Problems
Points to check with Possible Solutions
Change the mode in <Signal Filter> in the
<Screen> menu.
<Smoothing> is disabled when the screen is
displayed in the 1280 ×1024.
The image size is doubled both in horizontally
and vertically to (i.e. 1280 × 960 enlarged from
640 × 480) provide clear focus which does not
require this function.
The adjustment lock is probably on. To unlock:
turn the LCD monitor off. Then, while pressing
the Auto Adjustment Button, turn the power on.
(p. 21)
The Auto Adjustment Button does not function
if digital signal inputs.
The adjustment lock is probably on. To unlock:
turn the LCD monitor off. Then, while pressing
the Auto Adjustment Button, turn the power on.
(p. 21)
Check that the USB cable is correctly
connected.
Check that the PC and OS are USB compliant.
(For verification of USB support, consult the
manufacturer of each system.)
Check the PC's BIOS setting for USB. (For
details, refer to the manual of the PC).
Check that the USB cable is correctly connected.
Check the downstream ports by connecting the
peripherals to other downstream ports. If the
problem is solved by doing this, contact an
EIZO dealer. (For details, refer to the manual of
the PC.)
Try executing the following method.
Restarting the PC - Restarting the PC
Connecting the PC and peripherals directly
If the problem is solved by doing this, contact
an EIZO dealer.
Advertisement
Table of Contents
