Table of Contents
Advertisement
5.
Turn on the monitor's Power Button and then turn on the PC's
power.
The monitor's power indicator will light up (blue).
If an image does not appear, refer to the "7. TROUBLESHOOTING" (p. 36)
for advice.
Whenever finished, turn off the PC and the monitor.
NOTE
When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or
Digital) is displayed for a few seconds on the right top corner of the screen.
Adjust brightness of the screen depending on the brightness of your
environment.
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
2. CABLE CONNECTION
English
15
Advertisement
Table of Contents
