Maintenance - TEXA TMD MK5 Manual

12 MAINTENANCE

In order to guarantee a correct functioning of TMD MK5 FPT and of the accessories connected to
it, you must perform regular checks on the device.
We remind the operator to carry out the tests with the utmost care, making sure he/she is working
in total safety during all of the steps (see General Rules for the Safety of Operators in this
manual, also).
Maintenance interventions must be performed within 15 days from the installation of TMD
MK5 FPT and then every 6 months.
In particular:
• Carry out a visual check of all the devices installed.
• Make sure the device is not damaged; make sure all covers/plastic parts are properly
fastened; make sure no wiring is cut and/or damaged, no connectors are disconnected and/
or loose. Furthermore make sure the antennas are properly fixed in their installation housings.
• Make sure the connections are not damaged, oxidised, exposed to atmospheric agents, water
and humidity.
• Make sure all screws and bolts used to fasten TMD MK5 FPT are not damaged and are
properly tightened.
If the wiring or the connections have been exposed to atmospheric agents, water and moisture,
proceed with the waterproofing.
In case of damaged cables, contact TEXA S.p.A. in order to have them replaced.
For any fault or complication, contact the TEXA S.p.A. assistance service immediately.
28