LOADING NEW TAGS
CAUTION: DO NOT GRIP THE TAG STOCK BY ITS EDGES WHEN FEEDING
INTO THE PRINTER. PROTECT YOUR HANDS AND FINGERS FROM THE
SHARP EDGES OF THIN METAL TAG STOCK AT ALL TIMES.
1. Mount the new roll atop the circular platform to the left of the marker.
2. Feed by hand the tip of the tag stock, pushing it into first roller until it stops
on "the drive roller".
3. Once reaching the drive roller press the Amber Lighted Tag Feed
Pushbutton.
Reminder - The marker is not ready for use and will not feed tags until the
E-STOP button is returned to the OUT position by pulling red button.
If necessary, tag stock can be manually fed into the printer by pressing the FEED button located above the
large red E-STOP button.
Page 4
Copyright © 2003-2021 InfoSight Corporation All Rights Reserved
LL28XX Tag Printer